Looking forward to revamping your entire kitchen? You certainly cannot ignore cabinets. Knowing how to measure cabinet size for a perfect fit is crucial to attaining a gorgeous final appearance and smooth function. In this guide, we shall closely examine how you can measure your kitchen correctly.
Steps To Measure Your Kitchen For Accurate Cabinet Placement
Step 1: Grab Your Materials
The right materials will ensure that you can correctly measure and record the size of your kitchen. You will need:
A pen or pencil
Step 2: Sketch The Floor Plan
Sketch your kitchen’s floor plan on a sheet of grid paper. Make sure to consider and mark the position of:
Your initial draft does not have to be accurate or to scale, but it should define the kitchen layout clearly and correctly.
Step 3: Take And Record Horizontal + Vertical Measurements
Make sure to record all measurements in inches. You can begin by taking horizontal measurements of full wall lengths. Always begin from an adjoining wall corner and measure clockwise as you move from one edge to another. Skip appliances, fixtures, and windows. You can also mark your walls with numbers for ease.
After getting full wall lengths, you must measure your walls in smaller segments. Measure every opening from one outside edge to another. Include trims and moldings and label each segment for easy referencing.
Once you have your horizontal measurements, you can move towards vertical measurements that include measuring the length between the floor and window sill and the window tops to the ceiling. You will also need to get a final measurement from the ceiling to the floor and account for different ceiling heights by taking at least 3 separate measurements.
Step 4: Consider Obstructions
Once you have all the measurements noted down, it is time to consider any obstructions on the walls, like radiators, pipes, vents, etc. Obstructions cannot be removed, which can change how you position your cabinets in the kitchen.
Step 5: Take Utilities And Appliances Into Account
It would help if you took appliances and utilities that would stay in their places or get repositioned in your new kitchen into account. Consider water supply, power sources, vents, electrical outlets, refrigerator, oven, and hob positions. Mark these on your floor plan and their center points indicating the gas/plumbing line for each appliance.
Step 6: Plan The New Layout
Once you have recorded all measurements and obstructions and have taken appliances into account, you can start planning cabinet positions for the revamp. With a clear idea of available space, you can pick out the perfect aesthetic positions for your new cabinets.
Step 7: Select Your New Cabinets
There are tons of options you can pick from. Make sure to consider all kitchen cabinet varieties before making your final decision. Get the right dimensions for each cabinet for a perfect fit and stunning revamp!
Smart Tips To Measure Your Kitchen For Cabinets Perfectly
Take all horizontal measurements while keeping the same distance from the floor to ensure consistency.
Measure clockwise to prevent skipping a wall or forgetting what you last measured.
Label all doors, walls, and windows for accuracy.
Use the correct tools, such as an accurate tape measure, graph paper to stay straight, and a dark pencil.
Do not skip door or window casings and trims, which may lead to inaccuracy.
Identify the centerline of all permanent fixtures, including the windows, sinks, wall ovens, electrical outlets, doors, closets, and ducts.
The right measurements will not only ensure a perfect fit, but will also enable your cabinet doors to function smoothly. Make sure to follow all the steps above for the perfect kitchen revamp! For more expert advice, please visit the Affinity Kitchens website.